3-20 Placing an ALE Call
2. Enter the number of the channel to add and press E.
3. When the scan group is configured properly, press E to accept
the changes and exit this menu.
It is also possible to simultaneously delete and enter a different single-
digit channel by writing over the contents of an existing channel. This
is done by scrolling to the channel, pressing the single digit number of
the channel to add, and pressing E.
To Start and Stop Scanning
Press SCAN to start scanning within the selected scan group. Scan-
ning begins with the first channel in the scan group and continues in
numerical order with each channel number displayed in turn. Press
SCAN again to stop the scanning process.
Placing an ALE Call
The ALE option automatically selects frequencies that support com-
munications traffic between stations in a network. This section does
not cover the ALE option in detail. For detailed instruction on ALE
operations, refer to the 7000ALE Radio Control Program Operator
Manual (7000ALE-MSOP).
To initiate an ALE call:
1. Press OPTION until the ALE icon flashes.
2. Press STATUS to turn the option ON.
3. Press CALL.
4. Scroll to find the desired calling option:
THIS IS: Creates a link, exchanges messages, and remains
linked.
THIS WAS: Creates a link, exchanges messages, and then ter-
minates the link.
RE-LINK: Automatically chooses the best possible channel
using the information from a prior THIS IS call.
POLLING: Automatically completes a THIS WAS call on
each of the scan group channels. Link quality information is
recorded for each channel.
5. Press CALL to make the selection.
6. Scroll to find the type of call being made: INDIVIDUAL or
NET.PressCALL to make the selection.
Display: To:xx nnnn (where xx is the destination address
number and nnnn is the address name)
Commentaires sur ces manuels