Datron TW7000 Spécifications télécharger pdf (Page 4)

THEREIN, INCLUDING BUT NOT LIMITED TO

THE IMPLIED WARRANTIES OF MERCHANT-

ABILITY AND FITNESS FOR A PARTICULAR PUR-

POSE, AND DATRON EXPRESSLY DISCLAIMS

ALL WARRANTIES NOT STATED HEREIN.

Limitations of Warranty: This warranty does not

cover:

Physical damage to the equipment or its parts that does

not involve defects in design, material, or workmanship,

including damage by impact, liquids, temperature, or

gases.

Damage to the equipment or its parts caused by light-

ning, static discharge, voltage transients, or application

of incorrect supply voltages.

Defects or failures caused by unauthorized attempts to

repair or modify the equipment.

Defects or failures caused by Buyer abuse or misuse.

Return of Equipment - Domestic: To obtain perfor-

mance of any obligation under this warranty, the equip-

ment must be returned freight prepaid to the Technical

Support Services. Datron World Communications Inc.,

3030 Enterprise Court, Vista, California 92083. The

equipment must be packed securely. Datron shall not be

responsible for any damage incurred in transit. A letter

containing the following information must be included

with the equipment.

a. Model, serial number, and date of installation.

b. Name of dealer or supplier of the equipment.

c. Detailed explanation of problem.

d. Return shipping instructions.

e. Telephone or fax number where Buyer may be con-

tacted.

Datron will return the equipment prepaid by United Par-

cel Service, Parcel Post, or truck. If alternate shipping is

specified by Buyer, freight charges will be made collect.

Return of Equipment - International: Contact Datron or

your local Representative for specific instructions. Do

not return equipment without authorization. It is usually

not possible to clear equipment through U.S. Customs

without the correct documentation. If equipment is

returned without authorization, Buyer is responsible for

all taxes, customs duties, clearance charges, and other

associated costs.

Parts Replacement: The following instructions for the

supply of replacement parts must be followed:

a. Return the parts prepaid to “Parts Replacement”

Datron World Communications Inc., 3030 Enterprise

Court, Vista, California 92083; and

b. Include a letter with the following information:

1. Part number

2. Serial number and model of equipment

3. Date of installation

Parts returned without this information will not be

replaced. In the event of a dispute over the age of the

replacement part, components date-coded over 24

months previously will be considered out of warranty.

Remedies: Buyer’s sole remedies and the entire liability

of Datron are set forth above. In no event will Datron be

liable to Buyer or any other person for any damages,

including any incidental or consequential damages,

expenses, lost profits, lost savings, or other damages

arising out of use of or inability to use the equipment.

1/95

Safety Considerations

This product and manual must be thoroughly understood

before attempting installation and operation. To do so

without proper knowledge can result in equipment fail-

ure and bodily injury.

Caution: Before applying ac power, be sure that the

equipment has be properly configured for the available

line voltage. Attempted operation at the wrong voltage

can result in damage and voids the warranty. See the

manuals section on installation. DO NOT operate equip-

ment with cover removed.

Earth Ground: All Datron products are supplied with a

standard, 3-wire, grounded ac plug. DO NOT attempt to

disable the ground terminal by using 2-wire adapters of

any type. Any disconnection of the equipment ground

causes a potential shock hazard that could result in per-

sonal injury. DO NOT operate any equipment until a

suitable ground has been established. Consult the man-

ual section on grounding.

Servicing: Trained personnel should only carry out ser-

vicing. To avoid electric shock, DO NOT open the case

unless qualified to do so.

Various measurements and adjustments described in this

manual are performed in ac power applied and the pro-

tective covers removed. Capacitors (particularly the

large power supply electrolytics) can remain charged for

a considerable time after the unit has been shut off. Use

particular care when working around them, as a short cir-

cuit can release sufficient energy to cause damage to the

equipment and possible injury.

To protect against fire hazard, always replace line fuses

with ones of the same current rating and type (normal

delay, slow-blow, etc.). DO NOT use higher value

replacements in an attempt to prevent fuse failure. If

fuses are failing repeatedly this indicates a probable

defect in the equipment that needs attention.

Use only genuine Datron factory parts for full perfor-

mance and safety of this product.

Made in the USA

1 2 3 4 5 6 7 8 9 ... 55 56

Commentaires sur ces manuels

Pas de commentaire

Datron TW7000 Spécifications Page 4

Commentaires sur ces manuels