Datron TW7000 Spécifications télécharger pdf (Page 37)

Operation 3-9

(1) OPTION is not used.

(2) SCAN SET CHANNEL selects the scan group (selected using

Alpha 15) to be customized. For information on customizing a scan

group, refer to the Customizing a Scan Group section on page 3-19.

(3) SCAN RATE sets the rate at which channels within a selected scan

group (selected using Alpha 15) are scanned. A speed between 1 and

30 seconds per channel can be entered.

(4) PRIORITY CHANNEL changes the channel number of the prior-

ity channel. The default setting is channel 001. For information on

changing this channel, refertothePriorityChannelsectiononpage3-

(5) RF POWER changes the settings for the RF power output. The

default settings for the three power output levels are 10 (L), 25 (M),

and 200 (H). For information on changing these settings, refer to the

RF Power Level section on page 3-6.

(6) FREQ BLANK conceals the frequency so that only the channel

number displays. Every time ALPHA, 6,andE arepressed,theselec-

tion is toggled between ON and OFF.IfsettoON, the mode select

buttons are disabled.

(7) LOCKOUT prohibits changing any of the channel frequencies.

Every time ALPHA, 7,andE are pressed, the selection is toggled

between ON and OFF.IfsettoON, the mode select buttons are dis-

abled.

(8) RECEIVE SET Rx ONLY locks out the PTT on the displayed

channel, making it a receive-only channel. The status is automatically

set to ON whenever ALPHA, 8,andE are pressed. Alpha 18 reverses

the receive-only state to a receive and transmit state.

(9) SET CLOCK sets the internal clock (if installed) starting from the

year, down to the second. Enter the year, date, hour, minute, and sec-

ond pressing E after each value.

(10) ALARM TIMER automatically changes from OFF to ON

whenever ALPHA, 10,andE are pressed. In the ON position, the

alarm can be set (Alpha 11).

(11) SET ALARM sets the time for the sounding of the internal alarm.

Enter the year, date, hour, and minute, pressing E after each value.

(12) TIME AND DATE automatically displays the setting of the

internal clock.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 55 56

Pas de commentaire

Datron TW7000 Spécifications Page 37