Datron TW7000 Spécifications télécharger pdf (Page 38)

3-10 Alpha Menu

(13) TA/TS/SC Rx ADDR identifies the address for your station. The

current address displays briefly. Numbers from 001 to 255 are avail-

able. This number is usually the last three digits of the serial number.

(14) TRANSADAPT BER NUM sets the bit error rate (BER) for

evaluating channel performance. The higher number corresponds to

the better performing channel. The default BER setting is 70.

(15) SCAN GROUP NUMBER selects a particular scan group. The

scan group entered becomes the one used when accessing Alpha 2 and

Alpha 3. The default scan group is 00.

Note: The SCAN GROUP button on the front panel can also be used

to select a 7000TC scan group, provided ALE is OFF or not installed.

(16) TA/TC/SC Tx ADDR identifies the address number for the sta-

tion being called. The current number displays briefly. Numbers from

001 to 255 are available. This number is usually the last three digits of

the serial number.

(17) ALE submenu allows for configuration of the ALE system. For

information about the ALE submenu and how the system is config-

ured, refertotheALESubmenusectiononpage3-11.

(18) RECEIVE SET Rx/Tx changes the displayed channel to an RX

and TX channel. Entering ALPHA, 8,andE changes the setting back

to an RX channel.

(19) RF POWER ATU SET controls the RF power level to be used

during the tune cycle for an external, automatic, antenna tuner. The

default setting is 10. Levels from 0 to 33 can be entered.

(20) BITE TEST INITIATED automatically starts the transceiver’s

BITE system.

(21) OPTION 1 TYPE activates the Voice Enhancement option if the

7000VEM is installed. For more information, refer to the Activating

Voice Enhancement section on page 3-24.

(22) COM 1 BAUD allows configuration of a COM1 port if working

from a computer. Use the arrow keys to scroll through and enter the

baud rate, data bits, stop bits, and parity.

(23) COM 2 BAUD allows configuration of a COM2 port if working

from a computer. Use the arrow keys to scroll through and enter the

baud rate, data bits, stop bits, and parity.

(24) BACKLITE automatically toggles between ON and OFF.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 55 56

Pas de commentaire

Datron TW7000 Spécifications Page 38